Light and Shadow when using Altair Louvre Windows

News /
15 May 2016
Light and Shadow when using Altair Louvre Windows

With almost the entire eastern façade of the Breezway Head Office made up of a wall of Altair Louvre Windows there are two characteristics of our building that most visitors comment on….1) How pleasant it is to feel the breeze and 2) How much natural light streams into our building.

There’s another aspect which few visitors get to see because it only happens first thing in the morning when the sun is low in the sky – and that is the light patterns caused by the angled, open blades.

Altair Louvre Windows have green tinted glass blades to reduce the amount of heat entering the building in the form of sunlight. The sunlight passing through the tinted blades and the sunlight passing between the tinted blades forms geometric patterns on the walls and floors. The open clips add additional interesting patterns.

For around an hour the sunlight also reflects off the tops of the blades and forms patterns on the ceiling. Possibly my favourite light effect (and also the trickiest to photograph) is the rainbows on the floor created by the sunlight refracting through the edges of the glass blades. 

For more inspirational ideas on how to use Breezway Altair Louvre Windows in your building designs, please visit www.breezway.com.au

Breezway

Breezway has been designing and manufacturing louvre windows since the 1950’s.

Learn more

Regional Office/Distributor

Breezway

35 Cambridge Street

Coorparoo, 4151

Phone: 07 3847 0...