Boral Timber flooring featured in QPAC redevelopment

1 October 2010

Following an extensive renovation, the Queensland Performing Arts Centre now boasts two freshly refurbished theatres – the Concert Hall and the Lyric Theatre – providing a stunning aesthetic, enhanced acoustics and greatly improved wheelchair access.

Contributing to the striking new look of the Concert Hall is Boral Timber’s flooring in a Blackbutt species, which has been used throughout, including on the platforms of an impressive new seating unit.

This native species was chosen for its hardness and durability as well as the light cream and brown hues, which provide the Concert Hall with a light, spacious ambience.

“The quality and colour of the timber significantly contribute to the revitalisation of the venue,” said Richard Coulson, Director, Cox Rayner Architects. “The acoustics have also been considerably improved, enhancing the overall experience for visitors.”

A 45x19mm board width was selected, enabling it to be bent to fit the 27 metre radius of the theatre. Using Selleys Liquid Nails adhesives, the flooring was glued down to prevent any movement of the floor once laid. Ironbark nosing was then installed on each of the steps of the aisle to provide a hardy and highly visible tread.

“We’re delighted with the finished look and have had a great response from our regular visitors who are really impressed with the transformation,” said Bill Jessop, Executive Manager of Production Services, Queensland Performing Arts Centre.

For further information, call 1800 818 317 or visit the Boral Timber website.

Products from this supplier

More news from this supplier

A versatile solution for UWS Climate Change Research Facility 7 February 2012

BORAL TIMBER’S Kiln Dried F27 (KDF27) structural timber has been used extensively in the development of the University of Western Sydney’s Climate Change and Energy Research (CCER) More…

Introduces new 10mm profile to flooring range 1 November 2011

BORAL TIMBER has released a 10mm overlay solid strip flooring product, designed to be laid directly over a structural surface, expanding its range of timber flooring solutions. With More…

Timber brings warmth and practicality to family’s dream home 15 September 2011

PRACTICALITY, WARMTH and colour were the winning attributes behind the extensive use of Boral Timber’s hardwood flooring in the building of a waterside family home in Queensland’s More…

Timber chosen for environmental credentials in urban design 26 May 2011

BORAL TIMBER’S structural hardwood product has been used extensively throughout a much-needed new car park on Fisher Street in Cabramatta, commissioned to alleviate the area’s traffic More…

Hardwood timber increasingly used in non-traditional ways 31 January 2011

THE STRENGTH and durability of hardwood timber make it an ideal material not only for flooring but as a decorative feature to lift a commercial or residential space. “Over the last More…

Show more articles
Boral Timber – Logo

Boral Timber

Boral Timber is one of the largest suppliers of certified hardwood, softwood and plywood timber in Australia with a wide product range including timber flooring, structural timber, decking, decorative, panelling, clad... More...

Head office

Boral Timber

89 St Hilliers Road

Auburn, NSW, 2144

Tel: 1800 818 317

QLD

Boral Timber

733 Nudgee Road

Northgate, QLD, 4014

Tel: 1800 818 317

SA

Boral Timber

Building 19, Industrial Estate

Cheltenham Estate

Woodville, SA, 5011

Tel: 1800 818 317

Vic

Boral Timber

17-19 Summit Road

Noble Park, Vic, 3174

Tel: 1800 818 317

WA

Boral Timber

2/46 Collingwood St

Osborne Park, WA, 6017

Tel: 1800 818 317

Contact this supplier

For added security please enter the code in the image.

Captcha Image
Refresh the image if you cannot read the code.
Remember me on this computer
Submit enquiry

Endorsed by