New range of environmentally friendly insulation with Zero ODP

17 June 2010

Austech has been promoting the environmental benefits of Extruded Polystyrene Insulation for years, and has just launched its newest product, an Extruded Polystyrene Board with Zero Ozone Depletion Potential (ODP) Zero ODP insulation is made by using a blowing agent that has Zero Ozone depletion potential. There are multiple blowing agents that protect the ozone, but some have high global warming potential (GWP). HFC-134a has a global warming potential of 1300, causing considerable damage to the environment. Polyboard Enviro 300 uses a C02 blowing agent, which is the most environmentally friendly option, with a Global Warming Potential of only 1 *. Always make sure you are purchasing Zero ODP insulation with a CO2 blowing agent to avoid environmental damage.

Extruded Polystyrene has impressive thermal properties and superior compressive strength. Polyboard Enviro 300 50mm has an R-value of R1.56 and 75mm has an R-Value of R2.34, making it superior to other forms of insulation, including EPS. It also has a minimum compressive strength of 300kPa, so it can go under slabs and can be walked over easily. Extruded Polystyrene absorbs no water, so it maintains its high thermal performance over a long period of time.

The minute amount of carbon released in the products production is quickly recouped once installed, as the insulation reduces temperature fluctuations, energy consumption and carbon emissions. Polyboard Enviro 300’s low GWP, Zero ODP and high thermal performance makes it one of the most environmentally friendly insulation products on the market.

Extruded Polystyrene has nearly limitless building applications and Polyboard Enviro 300 is no different. Polyboard Enviro 300 is recommended for every environmentally conscious project, and can be utilized in any of the following applications:

  • Masonry/Precast Wall Internal Insulation.
  • PRMA (Protected Roof Membrane Assembly).
  • Cold Storage Floor Insulation.
  • Roof Garden Insulation.
  • Brick/Masonry Cavity Wall Insulation.
  • Residential In-Slab Floor Heating System Insulation.
  • Commercial Underslab Insulation.
  • EIFS (Exterior Insulation & Finishing Systems).
  • Wine Cellar & Wine Storage Insulation.

Please Contact Austech for more information on our range of environmentally friendly products.

*GWP data comes from the IPCC Second and Third Assessment report for Greenhouse Gasses.

More news from this supplier

Duratuff Select vinyl cladding complemented by CraftStone 25 May 2012

A TWO storey residence on the mid north coast of NSW has used a combination of Duratuff Select Vinyl Cladding with CraftStone and substantially transformed the exterior appearance of More…

Sydney home uses Foundry Stone to complement vinyl cladding 6 February 2012

AUSTECH EXTERNAL Building Products have teamed up with Country Style Cladding (CSC) to completely refurbish the external cladding of a local Sydney home. Austech distribute Duratuff More…

Subway food chain use Austech Building Products’ CraftStone 15 November 2011

THE SUBWAY food chain has been one of the fastest growing franchises in the world with over 35,000 restaurants in 98 countries and territories. Austech Building Products delivered one More…

Austech's CraftStone chosen for new Nandos Store 11 October 2011

NANDOS IS one of the fastest growing franchises in Australia, closing in on 300 outlets nationwide. Newstead in Brisbane became another dot on the map for the Nandos group, as a brand More…

Primo Smallgoods choose Foamular 4 October 2011

PRIMO SMALLGOODS is Australia’s largest producer of ham, bacon and smallgoods. The brand Primo is well known and to many, a household name in relation to the weekly visit to the grocery More…

Show more articles
Austech External Building Products – Logo

Austech External Building Products

Austech External Building Products caters to the needs of architects, engineers, builders and DIY enthusiasts with a wide range of high-quality and innovative products. Austech specializes in Foamular Extruded Polysty... More...

Head office

Austech External Building Products

80 Tattersall Road

Blacktown, NSW, 2148

Tel: 02 9831 1623

Tel: sales@austech.com.au

Fax: 02 9831 5043

QLD

Austech External Building Products

1/1089 Kingsford Smith Drive

Eagle Farm, QLD, 4009

Tel: 07 3268 3066

Tel: sales@austech-qld.com.au

Fax: 07 3268 3021

Tas

Austech External Building Products

4/8 Melrose Court

Sandy Bay, Tas, 7005

Tel: 03 6225 4003

Tel: sales-tas@austech.com.au

Fax: 03 6225 4003

Vic

Austech External Building Products

36 Isabella Street

Moorabbin, Vic, 3189

Tel: 03 9532 0131

Tel: sales-vic@austech.com.au

Fax: 03 9532 1868

WA

Austech External Building Products

20 Hilltop Close

Mahogany Creek, WA, 6072

Tel: 08 9295 0500

Tel: sales-wa@austech.com.au

Fax: 08 9295 6699

Contact this supplier

For added security please enter the code in the image.

Captcha Image
Refresh the image if you cannot read the code.
Remember me on this computer
Submit enquiry

Endorsed by