Extruded Polystyrene with a minimum of 20% recycled content

31 January 2011

Foamular Extruded Polystyrene from Austech External Building Products is now guaranteed to contain a minimum of 20% recycled content in addition to its other green qualities.

Extruded polystyrene has an exceptionally long lifetime of 50+ years, so it doesn’t need to be replaced often, reducing the need for landfill space or recycling of old material. Expanded polystyrene on the other hand only lasts around 7-12 years before it starts to degrade under regular conditions. Once expanded polystyrene degrades it lets in moisture, which causes a dramatic reduction in R-value and loss of physical form. This can cause severe problems to structures and reduces thermal efficiency.

Foamular’s Manufacturer, Owens Corning, have put into place a variety of measures to reduce their environmental impact, including; GHG emissions, water use, power use, waste to landfill, particle matter and volatile organic compounds. So far they have already met and exceeded most of their goals and are well on their way to achieving their ambitious 2013 targets.

The recycled content comes from post production waste. When making the board perfectly flat and trimming of excess product there can be large amounts of wasted produced which normally go straight to landfill.

Foamular now recycles that waste directly back into the product, limiting the waste sent to landfill, but also reducing the raw materials required to produce the product.

Recycled post production waste is better than general waste because it is guaranteed to be clean and free of contaminants. This helps guarantee Foamular’s high R-values and overall product quality, so projects can be green without sacrificing on quality.

Old Extruded polystyrene can also be easily recycled again and again with little effort. DWF airport reused 88% of the Extruded polystyrene on its 28,000+ square meter roof after 17 years of exposure to extreme conditions. Foamulars high R-values were maintained and its high compressive strength meant the boards had not disfigured at all. This was estimated to save the builder over $15,000 in landfill costs and $100,000 in labour costs.

Austech External Building Products also offer a range of Zero Ozone Depletion Potential (ODP) Extruded Polystyrene for highly eco conscious projects. Polyboard Enviro 300 offers the high R-values and strength of traditional extruded polystyrene, but is made with a patented blowing agent that does not release any chemicals with Ozone Depletion Potential. Polyboard Enviro 300 can also be used towards Green Star accreditation and a range of other environmental credentials

More news from this supplier

Sydney home uses Foundry Stone to complement vinyl cladding 6 February 2012

AUSTECH EXTERNAL Building Products have teamed up with Country Style Cladding (CSC) to completely refurbish the external cladding of a local Sydney home. Austech distribute Duratuff More…

Subway food chain use Austech Building Products’ CraftStone 15 November 2011

THE SUBWAY food chain has been one of the fastest growing franchises in the world with over 35,000 restaurants in 98 countries and territories. Austech Building Products delivered one More…

Austech's CraftStone chosen for new Nandos Store 11 October 2011

NANDOS IS one of the fastest growing franchises in Australia, closing in on 300 outlets nationwide. Newstead in Brisbane became another dot on the map for the Nandos group, as a brand More…

Primo Smallgoods choose Foamular 4 October 2011

PRIMO SMALLGOODS is Australia’s largest producer of ham, bacon and smallgoods. The brand Primo is well known and to many, a household name in relation to the weekly visit to the grocery More…

Foundry Stone on display at Central Coast Home Expo 13 September 2011

THE INAUGURAL Central Coast Home Expo took place on Sunday the 28th of August at the Central Coast Grammar School. The main goal of the day was to; bring innovative home improvement More…

Show more articles
Austech External Building Products – Logo

Austech External Building Products

Austech External Building Products caters to the needs of architects, engineers, builders and DIY enthusiasts with a wide range of high-quality and innovative products. Austech specializes in Foamular Extruded Polysty... More...

Head office

Austech External Building Products

80 Tattersall Road

Blacktown, NSW, 2148

Tel: 02 9831 1623

Tel: sales@austech.com.au

Fax: 02 9831 5043

QLD

Austech External Building Products

1/1089 Kingsford Smith Drive

Eagle Farm, QLD, 4009

Tel: 07 3268 3066

Tel: sales@austech-qld.com.au

Fax: 07 3268 3021

Tas

Austech External Building Products

4/8 Melrose Court

Sandy Bay, Tas, 7005

Tel: 03 6225 4003

Tel: sales-tas@austech.com.au

Fax: 03 6225 4003

Vic

Austech External Building Products

36 Isabella Street

Moorabbin, Vic, 3189

Tel: 03 9532 0131

Tel: sales-vic@austech.com.au

Fax: 03 9532 1868

WA

Austech External Building Products

20 Hilltop Close

Mahogany Creek, WA, 6072

Tel: 08 9295 0500

Tel: sales-wa@austech.com.au

Fax: 08 9295 6699

Contact this supplier

For added security please enter the code in the image.

Captcha Image
Refresh the image if you cannot read the code.
Remember me on this computer
Submit enquiry

Endorsed by