Austech looks into the dangers of the Home Insulation Scheme

29 April 2010

With the demise of the Federal Government's $3.9 Billion Energy Efficient Homes Program came the revelation that as many as 1.1 million Australian homes may be in danger of hazardous installation practices that have already caused countless house fires.

The government will be inspecting some of the homes insulated under the scheme, but this will take months and many won’t be inspected, so what can you do to check if your home is safe now?

Some of the most common problems include:

  1. Laying batts directly over downlights.
  2. Not removing old blown insulation properly, resulting in old insulation building up around downlights.
  3. Not sticking to the minimum 200mm clearance around downlights.
  4. Insulation interfering with other electrical products in the roof.
  5. Dust, dirt and dangerous chemicals entering the home through openings in the ceiling (through downlights and exhaust fans).

Issue 1-3 can all be solved by installing downlight safety hoods. Isolite Downlight Guards can be placed right next to insulation, so once installed there is no need for the 200mm clearance, improving your energy efficiency and safety.

When the insulation is over the downlight, simply cut a hole big enough for the guard and push the insulation around the guard (not over it) Isolite Downlight Guards also prevent old insulation, dust and ceiling debris from touching the downlight, dramatically improving safety.

It’s not only downlights that can cause fires. One confirmed fire was ignited when insulation caused an exhaust fan to catch fire. For standard exhaust fans, Austech recommends installing DraftStoppas. DraftStoppas stop insulation and other materials coming into contact with the exhaust fan, reducing the risk of fire.

It is estimated that 30-40% of Batts used in the scheme are non compliant with Australian standards. These Chinese knockoffs often don’t have the R-value stated, or worse, have been proven to contain dangerous levels of chemicals like formaldehyde, a known carcinogenic. These chemicals, as well as dust, debris and old insulation filter down into the home though openings. Isolite Downlight Covers and DraftStoppas limit tainted air re-entering the home through openings, creating a cleaner home with better air quality.

Both Isolite Downlight Covers and DraftStoppas can be installed by the home owner, reducing costs and risk from further installers. Austech’s online shop (www.austechshoponline.com.au) sells Isolites and DraftStoppas, plus a variety of other products to meet your renovation needs. Austechshoponline.com.au delivers Australia wide and can provide you with installation instructions.

More news from this supplier

Duratuff Select vinyl cladding complemented by CraftStone 25 May 2012

A TWO storey residence on the mid north coast of NSW has used a combination of Duratuff Select Vinyl Cladding with CraftStone and substantially transformed the exterior appearance of More…

Sydney home uses Foundry Stone to complement vinyl cladding 6 February 2012

AUSTECH EXTERNAL Building Products have teamed up with Country Style Cladding (CSC) to completely refurbish the external cladding of a local Sydney home. Austech distribute Duratuff More…

Subway food chain use Austech Building Products’ CraftStone 15 November 2011

THE SUBWAY food chain has been one of the fastest growing franchises in the world with over 35,000 restaurants in 98 countries and territories. Austech Building Products delivered one More…

Austech's CraftStone chosen for new Nandos Store 11 October 2011

NANDOS IS one of the fastest growing franchises in Australia, closing in on 300 outlets nationwide. Newstead in Brisbane became another dot on the map for the Nandos group, as a brand More…

Primo Smallgoods choose Foamular 4 October 2011

PRIMO SMALLGOODS is Australia’s largest producer of ham, bacon and smallgoods. The brand Primo is well known and to many, a household name in relation to the weekly visit to the grocery More…

Show more articles
Austech External Building Products – Logo

Austech External Building Products

Austech External Building Products caters to the needs of architects, engineers, builders and DIY enthusiasts with a wide range of high-quality and innovative products. Austech specializes in Foamular Extruded Polysty... More...

Head office

Austech External Building Products

80 Tattersall Road

Blacktown, NSW, 2148

Tel: 02 9831 1623

Tel: sales@austech.com.au

Fax: 02 9831 5043

QLD

Austech External Building Products

1/1089 Kingsford Smith Drive

Eagle Farm, QLD, 4009

Tel: 07 3268 3066

Tel: sales@austech-qld.com.au

Fax: 07 3268 3021

Tas

Austech External Building Products

4/8 Melrose Court

Sandy Bay, Tas, 7005

Tel: 03 6225 4003

Tel: sales-tas@austech.com.au

Fax: 03 6225 4003

Vic

Austech External Building Products

36 Isabella Street

Moorabbin, Vic, 3189

Tel: 03 9532 0131

Tel: sales-vic@austech.com.au

Fax: 03 9532 1868

WA

Austech External Building Products

20 Hilltop Close

Mahogany Creek, WA, 6072

Tel: 08 9295 0500

Tel: sales-wa@austech.com.au

Fax: 08 9295 6699

Contact this supplier

For added security please enter the code in the image.

Captcha Image
Refresh the image if you cannot read the code.
Remember me on this computer
Submit enquiry

Endorsed by