Post anchors

Supplier:
Pryda

Pryda's extensive range of post anchors accommodate the locating and fixing of timber posts to a timber or concrete base. The post anchor is either fixed to the timber or concrete surface with the appropriate fastener or embedded into the concrete footing.

Post anchors are typically used when constructing, pergolas, decks and verandas.

There is a Pryda post anchor available to suit almost any desired application and post size. The range includes:

  • Full Stirrup
  • Half Stirrup
  • Bolt Down
  • High Wind
  • Centre Fix
  • Centre Pin
  • Adjustable

Pryda post anchors are manufactured to a consistent quality and complies with the relevant building codes and standards. Advantages include:

  • Manufactured from G250 steel complies with AS1397.
  • Hot dip galvanised coating to provide long term protection, suitable for severe external environments. (as defined in the Building Code of Australia, HDG 300 g/m².
  • Stems in stirrup anchors are sealed for termite protection. Complies with AS 3660.1-2000 Protection of Buildings from Termites.
  • All joints are welded.

Improved stability of the base with bolt holes close to the stem.

  • A large range of sizes to suit:
  • Leg lengths from 65 mm to 600 mm
  • Stirrup widths 90 mm, 100 mm, 115 mm, 125 mm and 150 mm.
  • Adjustable stirrup to suit any post size
  • Several configurations: Full Stirrup, Half Stirrup, Bolt Down, High Wind, Centre Fix, Centre Pin and Adjustable.

Full Stirrup: Stirrup Thickness – 4.0 mm; Stem Dimensions – 25 mm diameter x 2.0 mm thickness. Primarily used for bolting to existing concrete or setting into concrete footings.

Half Stirrup: Stirrup Thickness – 4.0 mm; Stem Dimensions – 25 mm diameter x 2.0mm thickness. Ideally suited to uses where the post is located against a wall or step and can only be bolted from one side. Can be bolted to existing concrete or set into concrete footings. Recommended maximum post size is 90 mm.

Bolt Down: Dimensions – 2 mm stirrup and 3 mm base thickness. With knockout 3 mm adjustable washer to facilitate adjustment after bolt holes have been drilled, this product is ideal for locating posts onto existing concrete or decking.

High Wind: Dimensions – 5 mm stirrup thickness. Engineered for high wind areas, including tropical regions. The U shape base is designed for maximum hold down in concrete.

Centre Fix: Stirrup Thickness – 4.0 mm; Stem Dimensions – 25 mm diameter x 2.0mm thickness. Generally used to hide the post anchor. The post is slotted at the bottom and bolted through the post and anchor, leaving only the bolt head, nuts and washers visible.Can be bolted to existing concrete or set into concrete footings. Recommended maximum post size is 90 mm.

Centre Pin: Stem Dimensions – 25 mm diameter x 2.0 mm thickness. For use where the post anchor and the fasteners are not to be visible. Due to the fixing method, it is only suitable for small spans or where no roofing is used. Recommended post size not to exceed 125 mm.

Adjustable: Dimensions – 5mm stirrup thickness. As the product is supplied in opposing halves it is fully adjustable for post sizes up to 125 mm. The adjustability has the added convenience of not having to check the post.

Pryda Full Stirrup Post Anchor.
Pryda Full Stirrup Post Anchor.
Pryda Half Stirrup Post Anchor.
Pryda Half Stirrup Post Anchor.
Pryda Bolt Down Post Anchor.
Pryda Bolt Down Post Anchor.
Pryda Centre Fix Post Anchor.
Pryda Centre Fix Post Anchor.
Pryda Centre Pin Post Anchor.
Pryda Centre Pin Post Anchor.
Pryda High Wind Post Anchor.
Pryda High Wind Post Anchor.
Pryda Adjustable Post Anchor.
Pryda Adjustable Post Anchor.

Request more information

For brochures, pricing, samples, technical specs and more, contact the supplier directly or use the form below.


Head Office

Pryda

153-187 Discovery Road

Dandenong South, Vic, 3175

Phone: 1800 810 ...

Regional Office/Distributor

Pryda

47-55 Williamson Road

Ingleburn, NSW, 2565

Phone: 02 9605 0...

Regional Office/Distributor

Pryda

16-26 Wentworth Place

Banyo, QLD, 4014

Phone: 07 3902 4...

Pryda

Pryda is a design and production systems supplier to its licensed roof truss, floor truss and wall frame fabricators. They are recognized for their innovative, building code compliant timber connector products and truss systems.

Learn more

Head Office

Pryda

153-187 Discovery Road

Dandenong South, Vic, 3175

Phone: 1800 810 ...

Regional Office/Distributor

Pryda

47-55 Williamson Road

Ingleburn, NSW, 2565

Phone: 02 9605 0...

Regional Office/Distributor

Pryda

16-26 Wentworth Place

Banyo, QLD, 4014

Phone: 07 3902 4...

Pryda

Pryda is a design and production systems supplier to its licensed roof truss, floor truss and wall frame fabricators. They are recognized for their innovative, building code compliant timber connector products and truss systems.

Learn more