Enware water monitoring system installed at Gold Coast hospital

News /
1 July 2015
Enware water monitoring system installed at Gold Coast hospital
Gold Coast University Hospital, one of Queensland's largest clinical teaching and research facilities, has had over 1500 Thermostatic Mixing Valves (TMVs) along with Smart Flow Water Monitoring System installed from Enware's range.

Enware was approached by Gold Coast University Hospital, one of Queensland's largest clinical teaching and research facilities, to install over 1500 Thermostatic Mixing Valves (TMVs) along with the Smart Flow Water Monitoring System across the entire site. After a two year installation period this project has now been successfully completed.

The construction of the hospital itself was enormous - made up of seven main buildings and a total floor space of around 170,000 square metres with an extremely efficient design and plan to allow expansion to meet future health service needs of the community.

With increased pressure on facilities to have a greater understanding and control of water usage and temperature control along with detailed reporting and accountability, the use of TMV monitoring systems is now recognized as an essential tool for facility managers.

Our Smart FlowWater Monitoring Software has high level integration with Building Management Systems (BMS) via BACnet/IP – this means alarms, errors and system events can be immediately communicated with any BMS providing full BACnet compliance.

The sheer size of the job did create a few challenges – with TMVs needing to be installed across 7 separate buildings on a 13 acre site, we successfully coordinated the numerous contractors and supplied detailed commissioning documentation for a complete system that is able to monitor more than 1500 TMV outlets at 1.5 second intervals.

Enware’s innovative Smart Flo Water Management System is a great solution for monitoring multiple buildings simultaneously.

Enware Australia

Enware is an Australian owned and operated manufacturer and distributer of commercial and industrial plumbing and safety products.

Learn more

Head Office

Enware Australia Pty Ltd

7-11 Endeavour Road

Caringbah, NSW, 2229

Phone: 02 9525 9...

Regional Office/Distributor

Enware Australia (QLD)

9 Virginia Street

Virginia, QLD, 4014

Phone: 07 3637 6...

Regional Office/Distributor

Enware Australia (SA)

8 William Street

Mile End, SA, 5031

Phone: 08 8229 7...

Regional Office/Distributor

Enware Australia (VIC)

Unit E 6

63-85 Turner St

Port Melbourne, Vic, 3207

Phone: 03 9550 0...

Regional Office/Distributor

Enware Australia (WA)

Unit 2, 37 Discovery Drive

Bibra Lake, WA, 6163

Phone: 08 6595 0...